Tool for Opening Painted Shut Windows, or Is a Knife Enough?
Old wooden sash, decades of paint, won't budge. Try a razor and a putty knife first. If that fails, there's a tool to open painted shut windows.
As an Amazon Associate I earn from qualifying purchases.
Two ways to read this piece. The quick read tells it in three pictures and a few short paragraphs. The full story is the whole piece, with every source.

Decades of paint, and a razor goes first
Anyone with an old wooden sash that hasn't moved in decades gets the same first advice in r/centuryhomes, which is to keep it cheap. One reply puts the razor ahead, since it does the least harm. Another used the razor too, and only brought out a putty knife where the paint sat thickest.
Bob Vila's how-to names two kits for the job, and the cheaper is a putty knife and utility knife most people already own.

The small saw made for the seam
The reply under that razor comment adds a step. If the razor fails, get one of these, it says, linking a window zipper. It's a stainless blade, serrated and roughly heart-shaped, screwed to a handle at an angle.
Force the point into the seam and saw, and the seal breaks and the paint comes out of the gap with the blade. Somebody with a Queen Anne restoration behind them rates it well ahead of a 5-in-1 painter's tool.

One window, the knife. Several, the zipper.
Past the first window, the zipper is the buy. Bob Vila puts the line at more than one window, and the blog that wrote it up hands a house full of sealed sashes to the zipper.
Either blade gouges wood in a careless hand. A razor takes real care, says one zipper user, and the blog warns of a nasty gash. House built before 1978? Have the paint tested for lead before you cut.
Then order the zipper and take the seam slowly.
Want the details?
The full story has the rest, the annoying parts included, and every source.
The sash was painted in place once, and then painted over again every time the room got a new colour. Push up on it and the frame creaks while the window stays exactly where it is. In an old house there's rarely just one like it.
The first instinct is a razor blade down the seam, and sometimes that's all the job needs. When it isn't, old-house people keep recommending one small serrated tool to each other: the window zipper.
If you own an old house with its original wood windows and one or more of them is painted shut, the thing to settle before you buy anything is whether the knife already in the drawer will get them moving.
Start with a razor and a putty knife
When somebody asked r/centuryhomes for the consensus on opening painted-shut sash windows, several replies stuck to ordinary hardware. One said to start with a razor, because it's the easiest and least invasive. Another used a razor and then a putty knife on the really thick blobs of paint.
A third would use a 5-in-1 painter's tool for nearly all of it and a taping knife for the tight spots.
This Old House puts the same move first: cut the paint seal with a putty knife between the sash and the stop bead, the piece of wood that covers the top and sides of the window.
Savannah Sher's how-to at Bob Vila says the job needs either a putty knife and a utility knife or a window zipper, and that many people already have the first two.
For one stuck window, the knife is the answer. Past that, where the line falls depends on who you ask.
The Messy Workbench, a tool blog that wrote the zipper up in 2014, says a putty knife will do for a couple of windows. Bob Vila draws it tighter, recommending the zipper if you're opening more than one.
What is a window zipper?
A window zipper is a short serrated blade on a handle. The Messy Workbench describes it as a flat stainless-steel blade "sort of a sawtoothed heart shape", screwed on at an angle.
In the thread, the triangular serrated blade gets called a sash saw, and the next reply adds its other names: window zipper, deglazing tool.
The point goes into the gap between the sash and the frame. Then you slide it along the crack with a sawing motion, breaking the seal and pulling paint out as it goes.
Is it better than a knife?
The people who've used one say so. Somebody who'd used them extensively on a Queen Anne restoration called the zipper a far better tool than a 5-in-1. The reply to the razor advice was one line: if the razor isn't enough, get one of these, with a link to a zipper made by CRL.
The clearest case for it came from somebody who uses one: it's "the tool designed for freeing sashes from multiple layers of paint". It turns up in another thread there too, on a list of tools somebody thinks a new owner should get for an old house.
It's worth buying when there are several windows to free. The blog is blunter: if every window in the house is painted shut, you need one of these.

Does it gouge the wood?
Either tool can. The commenter who uses a zipper also said a razor works, but you have to be really careful that you don't gouge the wood.
Used with care, a zipper does no more than a little rubbing to the finish. Get reckless, though, and the blade can climb out of the groove and leave a gash in the wood.
Go slowly, whichever blade you're holding.
Is it a hard job?
Yes, with any tool. In a second thread there, started by someone who hadn't known the tool existed, the first reply was that there's nothing easy about this task. The same person has done a number of windows and says that with a hundred years of paint on them, it's brutal.
Expect the outside to be painted shut as well. The same person warns of it, and the 5-in-1 answer in the first thread calls a window sealed from the outside the bane of your existence. The Bob Vila how-to has the steps for that.
If it's still stuck after all that, one reply says to try again in the cool, dry season, and another says you can hire a specialist.
Is it lead paint?
If the house is older than 1978, lead is a question to settle before you cut into anything. This Old House says the paint in a pre-1978 house may contain lead and should be tested before you scrape. The EPA says the same about the date and has the guidance to read before the work starts, including who to hire if the answer is yes.
Test first, and let the EPA's page set the precautions. The Bob Vila how-to passes on the EPA's recommendation of a disposable N100 respirator when working with lead paint, and a reply in the first thread says you'll want a HEPA vacuum for it.

Count the windows. One stuck sash, and the razor and putty knife in the drawer are the right first try. Several, or one the knife won't get through, and it's time for a window zipper, a small buy for a tool made for exactly this. Settle the lead question, then take it slow.

